TechExpo Corp.


Tell your vendor you found it at TechExpo

Measurement & Control Equipment & Technology PRODUCTS
5C7-195 Temperature ControllerBenchtop temperature controller for thermoelectric moduleMcShane, Inc.
6311 pH / ORP Controller / AnalyzerpH/ORP Controller / Transmitter / Analyzer, 1/4 DIN, 4-Relays, 4-20 mA output, RS-485 interface, Selectable ATC.Jenco Instruments Inc.
Best-1 Controller pHMicroprocessor based pH or ORP controller with output for recording purposes.Analytical Measurements
Bimetal Plus ThermometerBimetallic Thermometer with integrated Thermocouple or RTD Sensor.H. O. Trerice Co.
COMPU-FLOW™ Model C6, SuperDoppler Clampon System; SmartMag Insertion SystemAbsolute best performance in the industry and most user friendly setup known. Total performance leader globally.TEKSCO USA
DA-650/645/640 - Density/Specific Gravity MeterAutomatic liquid density/specific gravity meters.K2 Analytical, inc.
Digital Panel Meters3½, 4, 4½, digital Panel for a variety of different uses.Non-Linear Systems
DVE™ ViscometerThe DVE features a brand new user interface and keypad. This unit has a contemporary design, adopting the look & feel of the DV1, DV2T and DV3T family! The attractively lit display features distinctive alpha-numeric characters that are easy to view, both close up and at distance. The bubble level has been conveniently situated on the front of the instrument below the display panel so that users can easily adjust the instrument for true vertical position. The updated DVE also offers a choice of scientific units for viscosity measurement including both cgs units: cP (centipoises) and P (Poise), and SI units: Pa-s (Pascal-seconds) and mPa-s (milliPascal-seconds). Viscosity test parameters, including spindle identity and rotational speed, can now be quickly selected from a table in the instruments memory. Furthermore, the new display shows test control parameters (spindle, speed) and measured values (% torque, viscosity).Brookfield AMETEK, Inc.
Etherpod4 axis control for analog servo with quadrature feedback, with digital I/O and analog inputs.Servo To Go, Inc.
Frequency Selective Voltmeter / Model 110Ideal for tuning and evaluating equipment with signals from 50Hz to 5MHz, performs single frequency and wideband measurements, built-in oscillator, portable, 20 hour battery operation.Signalcrafters Tech, Inc.
GAS FLOW METERSSierra is one of the most trusted manufacturers of high performance flow meters and controllers today. By combining superior product quality with a talented global support network of flow experts in 47 countries, Sierra consistently delivers quality flow measurement solutions for each customer. Our Thermal Mass, Transit-Time Ultrasonic, Vortex Shedding and Multivariable instruments are available in both standard and customized versions for applications in laboratory, industrial and hazardous environments. Sierra’s flow measurement technologies precisely measure or control very low flows of gas down to less than 1 sccm full scale as well as extremely high flows of gas, liquid, and steam. With rugged product design, cutting-edge innovation, and a worldwide team of flow experts, experience why customers around the globe rely on Sierra.Sierra Instruments, Inc.
Industrial Thermal Mass Flow MetersSierra® Heavy-Industrial Thermal mass flowmeters are designed for the most demanding industrial gas mass flow measurement applications. Featuring heavy-duty 316 stainless steel wetted materials, no moving parts and digital signal processing, our Heavy-Industrial Thermal mass flow meter line is the answer for the roughest industrial environments. The Model 640S Steel-Trak™ is an insertion probe design and our Model 780S Flat-Trak™ is an inline design featuring an integrated dual-plate flow conditioning element (Flow=Trak™) that allows the instrument to maintain top performance in heavily constrained piping environments where long, straight pipe runs simply do not exist. All models feature DIRECT mass flow measurement and Sierra's Smart Electronics Package for field-rangability, flow-range adjustment, and meter validation and diagnostics.Sierra Instruments, Inc.
JI/JW Series gas, steam ultrasonic vortex flowmetersNow with SMART Electronics and Hart ProtocolJ-TEC Associates, Inc.
Laser Microgage 2D Spindle Alignment KitUnique new alignment and measurement system for lathes, turning equipment, spindles, and related machinery. The spindle alignemnt kit is turnkey, easy to use, and easily transportable to the factory floor.Pinpoint Laser Systems
Levelometer Model 277Pneumatic liquid level gauge.Ktech Industrial Products Inc.
Mass Flow Controllers and MetersDigital, analog, high temperature, metal-sealed, elastomer-sealed, and range adjustable units to measure and control the flow of critical gases in a wide variety of applications.MKS Instruments, Inc.
MCT 460 NIR Moisture Analyzer for online measurementsInstantaneous online moisture, oil, coat weight and resin measurements. Quality and Process ControlProcess Sensors Corp.
Model 222 Thermal ImagingRadiometric Thermal Imaging for use with PCs.Compix Incorporated
Model 300058 Waterproof RefractometerRugged & waterproof, ideal for field use in agriculture, the food industry and wineries, as well as in the lab; 0 ~ 95% Brix, IP67 Waterproof, Rugged, Long-life Rechargeable BatteryRWC Testing & Lab Supplies
Multivariable Vortex Mass Flow MetersSierra's Multiparameter product line features an inline version, the Model 240 Innova-Mass® and a unique insertion version, the Model 241 Innova-Mass®. The Model 240 and Model 241 can measure the mass flow rate of any gas or liquid and are ideally suited for saturated or superheated steam. Our Multiparameter Technology allows one instrument and one process connection to measure FIVE process parameters at the same time. The Model 240 and Model 241 simultaneously measure mass flow rate, temperature, pressure, volumetric flow rate, and fluid density. The Model 240 and Model 241 are fully field-programmable, configurable and feature RS485, MODBUS or HART protocols. You save money by getting FIVE separate instruments in ONE. Increase your flow knowledge—Try Innova-Mass®!Sierra Instruments, Inc.
Polysulfone FlowmetersVariable Arc Flowmeter Line; Polysulfone, with vinyl end fittings; accuracy ± 5% fs - max. pressure: 150 psig/31 bars; in-line and panel mtgs. with or without valves.DAKOTA INSTRUMENTS
PS-100-VIDEO Macrovideo Polarimeter SystemDetects unacceptable stresses in transparent or translucent products that can result in cracking, warpage, reduced material strength and other defects, which may lead to field failures, personal injury, and potential product liability.Strainoptics, Inc.
Pulseless Metering Pump / QX SeriesAvailable in 500, 1500, 6000 and 20000 psi, maximum flow rates 500, 200, 50 and 10 ml/minute, single stroke volume <130, 46, 12 and 3.3ml.Vindum Engineering, Inc.
Temperature ControllersTOUCHSCREEN PRECISION TEMPERATURE CONTROL INSTRUMENT. The TC10 LAB (10A, 15V) and TC5 LAB (5A, 15V) are ultra-stable digital controllers for thermoelectrics and resistive heaters where tight temperature stability is required. Designed using the latest technology, stabilities better than 0.0009°C can be achieved with thermistors. High stability enables researchers to precisely monitor trace gases in fracking, bio-samples in life-sciences, and semiconductor performance. Tight control enables applications in electro-optics, imaging, spectroscopy, remote sensing, military, aerospace, communications, material processing, and environmental or manufacturing control. SAFETY IS BUILT IN. Over and under temperature limits as well as positive and negative current limits can be set. If the sensor signal is lost or a short is detected at the thermoelectric, output current is disabled. If temperature limits are exceeded, a signal to the active laser load can be sent to disable its current. An Auxiliary Sensor can be used to monitor the temperature of the system heatsink. ACTIVE AUTOTUNE. Instead of long, manual calculations to derive the optimal Proportional, Integral, and Derivative [PID] control terms for a load, press the Autotune icon and the instrument will automatically cycle through a characterization test to tune the control terms for best performance. Two methods of Autotune are available. Setpoint Response optimization will minimize the time to temperature for the load. Disturbance Rejection optimization is best when there will be significant changes to the ambient temperature or operating conditions. This could be for a pulsing laser diode where the active heat load changes or a sample that is to be tested in changing ambient temperatures.Wavelength Electronics, Inc.
Vector Magnetometer VTFVM400Electro Magnetic Meter; High Resolution: 1 nt in 100,000 nt field; Choice of units: T, uT, or mG; Two Coordinate Representations: Rectangular or Polar.VitaTech Engineering, LLC
VL-144 VibeLab Pro Digital Vibration ControllerVirtual Instrument; Vibration Controller, Random Vibration Controller; DSPLabworks Inc.
Vortex Shedding Flow MetersFlow Meters for Steam, Oil, Water, AirAALBORG Instruments & Controls, Inc.
Water Cut Meter Model DC-1510 Water in Oil AnalyzerNew and improved electronic signal processing now with higher resolution of 0.0001% water on lubricating oils.Delta C Technologies Inc.


To submit products to any of the lists, your company must be listed in the TechExpo Directory. The listing is free. Just fill out the free-list registration form.

You may submit one product to be listed in the Buyers' Guide at no charge. Additional product are posted at a nominal fee. Contact TechExpo for details.

We accept products NOW. Please email us with your company name, product name, category to be listed, and key specifications.


Suggestions and comments are welcomed; Please use our e-mail address
Return to Sensors, Measurement & Test & Lab Equipment CATEGORIES listing.

For site orientation return to Homepage
© TechExpo Corp.™, 1996.